ABT tracking test-new ABT漏電起痕No. 1 Tracking Test Apparatus, according to Standards IEC 60112 : 2003-01
詳細介紹
No. 1 Tracking Test Apparatus, according to Standards IEC 60112 : 2003-01
This instrument allows to determine the resistance and tightness indexes against track of insulating solid materials with tensions up 600 V, when their surface is exposed under electrical stress to water action containing ionic contaminants.
Description:
- Tracking Test apparatus model 02.10.
- Sheet iron structure, colour lacquered RAL7032 with protection dome in clear material
- Tank for testing liquid by automatic drops falling system
- Height of drops falling =35 mm
- Drops volume = 20 +5 mm
- Drops gap = 30 sec, can set the number of drops from 0 to 100
- Platinum electrodes as per figure 1 of standard IEC 60112
- Electrodes pressure force = 1 N
- Short-circuit release = 0,5A(max. value of the current indicating meter is less than1.5 A)
- Short-circuit release lag = 2 sec
- Switch board with Voltmeter and Ampere metre with digital reading, pre-selection drops counter, pushbuttons ON/OFF, STOP, START, TEST, CC/RESET
- Volt adjustment 0 ~600 V, Output of the tansformer is more than 600 VA
- Switch with fuse protections
- Safety micro-switch for working with closed protection only
- 4mmdiameter gauge to set electrodes, Thickness of the glass test platform is4 mm